Power flushing and system cleaning across North East London. Years of sludge and rust settle in radiators and slow the whole system down, leaving cold spots and a hard-working boiler. We flush the system out, treat it with inhibitor and fit a filter so the heat comes back and stays.
Radiators and pipework flushed through to clear the sludge and rust that cause cold spots and noise.
The clean system dosed with inhibitor so corrosion does not simply start building up again.
A magnetic filter fitted so future debris is caught before it reaches the boiler.
A clean carried out before a new boiler goes on, protecting it and keeping the warranty valid.
Cold spots at the bottom of radiators, dirty water when you bleed them, a noisy boiler or slow warm-up are the usual signs. We can test the system water and tell you whether a flush is worth doing.
Most domestic systems take the better part of a day, depending on the number of radiators and how bad the sludge is. Bigger or badly blocked systems can take longer, and we say so up front.
Combined with inhibitor and a filter, it should keep the system clean for years. Without that follow-up the sludge returns, which is why we always treat and protect the system after flushing.
Yes. Fitting a new boiler onto a dirty system pushes old sludge straight into it and can void the warranty. A clean beforehand protects your investment.
Tell us what you need and we will get a free quote back to you. Domestic or commercial, big or small.
Call us